Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual

Page: 263 / 458

OPERATION MACHINE OPERATIONS AND CONTROLS
3–193
RULES FOR OPERATION
RULES FOR OPERATION:PC-0000-001K13A
TRAVELLING
Traveling:PC-0000-186K01A
Travelling over boulders, tree stumps, or other obstacles will
cause a big shock to the machine (and in particular to the
undercarriage), and this will cause damage to the machine. For
this reason, always remove any obstacles or travel around
them, or take other steps to avoid travelling over such obsta-
cles as far as possible.
If there is no way to avoid travelling over an obstacle, reduce
the travel speed, keep the work equipment close to the ground,
and try to travel so that the centre of the track shoe passes
over the obstacle.
HIGH SPEED TRAVEL
HIGH SPEED TRAVEL:PC220-0000-186K00A
On uneven roadbeds such as rock beds or uneven roads with
large rocks, travel at Lo speed. When travelling at high speed,
set the idler in the forward direction.
q
Press travel speed selector switch (1) to switch the travel
speed. The travel speed (Lo, Mi, Hi) is displayed on the
travel speed monitor (2).