Komatsu PC210-10 DEMOLITION BASE SPEC., Operation & Maintenance Manual, Page: 158 / 458

EXPLANATION OF COMPONENTS OPERATION
3–88
OPENING AND CLOSING CAB FRONT WINDOW
Opening and closing cab front window:PC220-K181-100K00A
k
WARNING
q
When opening or closing the front window, bottom window, or door, always set the lock lever to the
LOCK position.
If the lock lever is at the FREE position and the control lever or control pedal is touched by mistake,
this may lead to a serious personal accident.
q
When opening or closing the front window, stop the machine on level ground, lower the work equip-
ment completely to the ground, stop the engine, then carry out the operation.
q
When opening the front window, hold the handle securely with both hands, pull up, and do not let go
until the automatic lock catch is locked.
q
When closing the front window, the window will move quicker under its own weight. Hold the handles securely
with both hands when closing it.
It is possible to stow the front window (upper side) in the roof of the operator's compartment.
OPENING
1. Stop the machine on level ground, lower the work equip-
ment completely to the ground, then stop the engine.
2. Set lock lever (1) securely to LOCK position (L).
3. Check that the wiper blade is stowed in the right stay.
4. Hold 2 handles (A) on the right and left top sides of the front
window, and pull 2 levers (B) to release the locks at the top
of the front window. The top of the front window will come
out.