PRECAUTIONS FOR MAINTENANCE
WEAM012101
69
2.8.13 SAFETY MEASURES TO OPEN (TILT)
THE PLATFORM
To open (tip) the platform, see "3.2.9 TILTING THE CAB FLOOR".
Safety measures to park the machine
q
Park the machine on a firm and level surface.
q
Select a place with no risks of landslide, falling objects or
floods.
q
Lower the working tool and scraper completely to the ground.
Measures for opening and closing
q
Do not open the platform when the machine is on a slope or if
there is strong wind.
This may cause serious personal injuries.
q
Do not open or close the platform with the engine running or if
the safety device lever is in the working position (F), as this is
extremely dangerous.
q
Immediately after the engine stops, the components and the oil
are extremely hot and may cause burns.
Before starting to open the platform, check that the temperature
in the engine compartment has lowered.
q
Upon opening the platform, do not go up or down from the oper-
ator seat.
You may fall and get seriously injured.
RYA00860
RYA00370
Summary of Contents for PC18MR-3
