Komatsu PC18MR-3, Operation & Maintenance Manual

Page: 114 / 284

INSTRUMENTS AND CONTROLS
112 WEAM012101
3.2.9.2 MACHINES WITH CAB
Tilting the cab floor
1. Lower the blade.
2. Extend the bucket and arm cylinders completely, then lower
the boom slowly.
3. Shift the safety lever (1) to the “locked” position (L), then stop
the engine.
4. Position blocks under the tracks in order to prevent the ma-
chine from moving.
5. Open the engine hood (2) completely and make sure that it is
kept open by the apposite rod (for further details, see "3.2.6
ENGINE HOOD").
6. Loosen the fastening screws of the cab floor (3).
RKA22440
9JA05466