Komatsu PC14R-3, Operation & Maintence Manual

Page: 239 / 246

PRECAUTIONS WITH THE AUTHORISED TOOLS
WEAM009300
237
6.4 PRECAUTIONS WITH THE AUTHORISED TOOLS
The instructions given below must be strictly followed when the hydraulic excavator is fitted with a piece of
equipment.
IMPORTANT
q
Choose the type of equipment that is most suitable to the hydraulic excavator on which it must be
installed.
q
Use only optional or special equipment recommended and approved by Komatsu and in compliance
with the requirements indicated (see "6.1.3 AUTHORISED TOOLS CHARACTERISTICS").
6.4.1 HYDRAULIC BREAKER
WARNING
q
The hydraulic breaker is very noisy, therefore always wear
ear muffs when using it.
MAIN APPLICATIONS
q
Crushing rocks
q
Demolition work
q
Road construction
This attachment can be used for a wide range of applications,
including demolition of buildings, breaking up of road surfaces or
debris, tunnel work, rock crushing and breaking operations in
quarries.
HOW TO USE THE BREAKER CORRECTLY
1. Make sure that the position of the breaker with respect to the
material to be broken is as perpendicular as possible and
that the arm thrust is sufficient, so that all the power of the
breaker can be exploited.
RYA03830
RYA03840