1.
Select “Retarder Lever Release Sound Setting”, then
press ENTER switch (4).
2.
Select “ON” or “OFF”, then press ENTER switch (4).
“ON”
Generates the cancel sound.
“OFF”
Does not generate the cancel sound.
REMARK
This setting is maintained even after turning the starting switch
to OFF position.
The default is “ON”.
AUTO IDLE STOP TIMER SETTING
The auto idle stop function stops the engine automatically when the engine is operated continuously at idle for a
set time.
The auto idle stop works only when all of the following conditions are met.
• The accelerator pedal is not depressed.
• The gear shift lever is in NEUTRAL position (N).
• The dump lever is placed in “FLOAT” position and dump body is seated.
(When the dump body float caution lamp is not lit)
• The machine is stopped.
• The aftertreatment devices are not in regeneration.
• There is no possibility of overheat.
EXPLANATION OF COMPONENTS
OPERATION
3-78
Summary of Contents for HD325-8
