Komatsu HB365LC-3, Operation & Maintenance Manual

Page: 243 / 506

• The regular position of the mirror is as follows:
Adjust the mirror (13).
Tightening torque of mounting bolt (12): 6.0 to 7.0 Nm{0.61
to 0.71 kgm}
Mounting angle (14): 20 °
Mounting position (15): 22 mm
METHOD FOR ADJUSTING REAR VIEW CAMERA ANGLE
k k
WARNING
• Always adjust the camera before starting work. If it is
not adjusted properly, you cannot secure the visibility
and a serious personal injury or death may result.
• When adjusting the angle of the camera, prepare a
scaffold first in order to provide a safe working plat-
form.
If you try to work standing on the counterweight, there
is a danger of serious injury or death due to falling off
from the machine.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-171