Komatsu HB365LC-3, Operation & Maintenance Manual

Page: 184 / 506

REMARK
• The spare fuses are installed in the back of the fuse holder
lid at the rear of the operator's seat.
• After using the spare fuses, replenish them immediately.
• One spare fuse is installed for each 5 A, 10 A, 20 A, 25 A,
and 30 A.
FUSIBLE LINK
NOTICE
Before replacing a fusible link, be sure to turn the starting switch to OFF position, then turn the battery
disconnect switch key to OFF position.
If the engine starting motor does not operate even when the
engine starting switch is turned to START position, the fusible
links (1) and (2) may be broken. Remove the cover (3) inside
the rear right of the machine, and perform the inspection or re-
placement.
REMARK
A fusible link refers to the large-sized fuse wiring installed in
the high current flow portion of the circuit.
It protects electrical components and wiring from burning, in the
same way as an ordinary fuse.
TOOL BOX
Store the tools in it.
This is installed in the case at front right of the machine.
NOTICE
Do not put a tool so large that it touches the capacitor.
This will cause the breakage of the capacitor.
EXPLANATION OF COMPONENTS OPERATION
3-112