Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 236 / 492

METHOD FOR FASTENING SEAT BELT
1.
Hold grip (2) and pull out the belt from retractable device
(1).
2.
Check that the belt is not twisted, and then inset tongue (3)
into buckle (4) securely.
3.
Pull the belt lightly to check that it is properly locked.
METHOD FOR UNFASTENING SEAT BELT
Press the button (5) in buckle (4) and remove the tongue (3) from buckle (4).
The belt is automatically wound in, hold the grip (2) and return the belt slowly to the retractable device (1).
REMARK
If the tongue of seat belt is not inserted in the buckle, the seat-
belt caution lamp is displayed at the top left of the machine
monitor. Fasten the seat belt.
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k k
WARNING
When starting the engine, check that the lock lever is securely at LOCK position.
k k
CAUTION
Proportional control neutral is detected
Do not touch the proportional switch on the left side (D) or
right side (E) when turning the starting switch (2) key to
ON position (B). If it is touched, "neutral detection system"
recognizes the "NEUTRAL" at wrong position, and it will
result in the unexpected movement of the attachment.
Perform the check before starting the engine according to the
following procedure.
1.
Check that the battery disconnect switch (S) is in ON posi-
tion (I).
MACHINE OPERATIONS AND CONTROLS OPERATION
3-164