Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 156 / 492

1.
Select “Language” (4) on “Monitor Setting” menu, then
press the switch F6.
2.
Select the language to use for the display, then press the
switch F6. The screen display changes to the selected lan-
guage.
On “Language” screen, you can perform the following op-
erations with switches F3 to F6.
F3: Moves to the item below.
F4: Moves to the item above.
F5: Cancels change and returns to the “Monitor Setting”
screen.
F6: Accepts change and returns the screen to the “Monitor
Setting” screen.
OPERATOR ID
You can check and change the “Operator ID” which is under identification on the “Operator ID” menu.
The “Operator ID” menu is not displayed when the operator identification function is disabled.
REMARK
Contact your Komatsu distributor for details of the method of setting, changing, or cancelling the operator identi-
fication function.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITH SKIP
When the starting switch is ON and ID is inputted, the identified
ID is displayed in the column of “Operator ID” on the “Monitor
Setting” menu screen.
When the starting switch is ON and “SKIP” is selected, “****” is
displayed in the column of “Operator ID” on the “Monitor Set-
ting” menu screen.
EXPLANATION OF COMPONENTS OPERATION
3-84