Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 150 / 492

REMARK
When resetting the remaining time to the maintenance, keep the switch F6 pressed for at least 1.5 seconds. If
the time for pressing the switch F6 is short, the switch operating sound can be heard, but the screen does not
switch to the screen for resetting the remaining time to the maintenance.
• If no switch is operated for 30 seconds on “Maintenance” menu screen, the screen automatically returns to
the standard screen.
• When the maintenance time caution lamp is lit on the standard screen, press F6 on the standard screen
and the screen automatically displays Maintenance menu screen.
• On “Maintenance” menu screen, if the time remaining to the maintenance for any item is less than 30 hours
(initial setting value), the remaining time display (c) is highlighted in yellow. If the time remaining to the
maintenance is less than 0 hours, display (C) is highlighted in red.
• If you want to change the setting for the maintenance time or maintenance notice time (initial setting: 30
hours), consult your Komatsu distributor.
Operations on “Maintenance Due Time Reset” screen
If you keep pressing the switch F6 for 1.5 seconds or longer on Maintenance menu screen, the screen changes
to Maintenance Due Time Reset screen.
Reset the remaining time to the maintenance on this screen.
1.
Press the switch F6 when the “Maintenance Due Time Re-
set” screen is in the condition shown in the figure. The
screen switches to the reconfirmation screen.
REMARK
• When canceling the reset, press the switch F5. The
screen returns to Maintenance menu screen.
• On the reset screen, if no switch is operated for more
than 30 seconds, the screen automatically changes to
Maintenance menu screen.
2.
The reconfirmation screen is displayed.
If you press the switch F6 again, the remaining time is re-
set and the screen returns to Maintenance menu screen.
REMARK
• When canceling the reset, press the switch F5. The
screen returns to Maintenance menu screen.
• On the reconfirmation screen, if no switch is operated
for more than 30 seconds, the screen automatically
returns to Maintenance menu screen.
MONITOR SETTINGS
Each item of “Monitor Setting” menu (f) is to make settings for
the monitor.
SCREEN ADJUSTMENT
Use “Screen Adjustment” menu to adjust brightness of the monitor screen.
EXPLANATION OF COMPONENTS OPERATION
3-78