Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 137 / 492

SWITCH DISPLAY/NON-DISPLAY OF ECO GAUGE
The setting of Display/Non-display of ECO gauge (7) can be
changed.
1.
Select the ECO Gauge Display (8) from the Configurations
screen, then press the switch F6.
2.
ECO Gauge Display setting screen appears.
ON: Displays the ECO gauge (7) on the standard screen.
OFF: Does not display ECO gauge (7) on the standard
screen.
On the Configurations screen, it is possible to perform the fol-
lowing operations with switches F3 to F6.
F3: Moves to the next item (1 line below). When it is on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When it is on the
first line, it moves to the last line.
F5: Cancels the setting change and returns the screen to Con-
figurations screen.
F6: Changes the setting and returns to Configurations screen.
SET TARGET FUEL CONSUMPTION VALUE DISPLAYED IN ECO GAUGE
It is possible to change the target fuel consumption value (the upper limit value of the green range) of the ECO
gauge .
1.
Select the ECO Gauge Target Value (9) from the Configu-
rations screen, then press switch F6.
2.
ECO Gauge Display Fuel Target Value appears.
OPERATION EXPLANATION OF COMPONENTS
3-65