Komatsu HB215LC-3, Operation & Maintenance Manual

Page: 122 / 492

REMARK
Each time wiper switch is pressed, the mode is displayed in the
center of the machine monitor display, and after 2 seconds, the
screen returns to the standard screen.
WINDOW WASHER SWITCH
Keep pressing the window washer switch continuously, and
window washer fluid is sprayed out on the front glass. When re-
leasing your hand, it stops.
• If you keep pressing the switch when the windshield wiper
is stopped, the window washer fluid is sprayed out. At the
same time, the windshield wiper is actuated continuously.
When releasing your hand from the switch, the windshield
wiper continues to operate for 2 cycles, then stops.
• If you keep pressing the switch when the wiper is moving
intermittently, the window washer fluid is sprayed out. At
the same time, the windshield wiper is actuated continu-
ously. When releasing your hand from the switch, the wind-
shield wiper continues to operate for 2 cycles, then it re-
turns to intermittent operation.
BUZZER CANCEL SWITCH
Buzzer cancel switch is used to stop the alarm buzzer for the warning item where there is an abnormality.
EXPLANATION OF COMPONENTS OPERATION
3-50