Komatsu Galeo PC800LC-8, Operation & Maintenance Manual, Page: 39 / 318

SAFETY
SAFETY INFORMATION
2-15
q
When leaving the machine, always lower the work equip-
ment completely to the ground, set lock lever (1) securely
to the LOCK position (L), then stop the engine. Use the key
to lock all the equipment. Always remove the key, take it
with you, and keep it in the specified place.
HANDRAILS AND STEPS
To prevent personal injury caused by slipping or falling off the machine, always do as follows.
q
Use the handrails and steps marked by arrows in the dia-
gram on the right when getting on or off the machine.
q
To ensure safety, always face the machine and maintain
three-point contact (both feet and one hand, or both hands
and one foot) with the handrails and steps (including the
track shoe) to ensure that you support yourself.
q
Do not grip the control levers, or lock lever when getting on
or off the machine.
q
Never climb on the engine hood or covers where there are
no non-slip pads.
q
Before getting on or off the machine, check the handrails
and steps (including the track shoe). If there is any oil,
grease, or mud on the handrails or steps (including the
track shoe), wipe it off immediately. Always keep these
parts clean. Repair any damage and tighten any loose
bolts.
q
Do not get on or off the machine while holding tools in your hand.