Komatsu Galeo PC800LC-8, Operation & Maintenance Manual

Page: 113 / 318

OPERATION
DETAILED CONTROLS AND GAUGES
3-49
EMERGENCY EXIT FROM OPERATOR'S CAB 3
q
If for some reason, the cab door does not open, remove
the rear window and use it as an emergency escape.
q
Remove the rear window as follows.
1. Pull ring (1) and completely remove seal (2) from the rub-
ber core.
2. With pressure push on corner of the window, the glass will
fall outside.
q
Do not remove the rear window except when using it
as an emergency exit.
DOOR LOCK 3
WARNING
q
Before the releasing the door lock, always stop the machine on flat ground. Never release the door
lock on a slope. The door may suddenly close and cause injury.
q
When releasing the door lock, do not extend your body or hands outside the machine and do not put
your hands on the door frame. The door may suddenly close and cause injury.
Use the door lock to fix the door in position after opening it.
1. Push the door against catch (1) to lock it in position.
2. To release the lock, press knob (2) down at the left side of
the operator's seat to release the catch.
When fixing the door, fix it firmly to the catch.
CAP WITH LOCK 3
Use the starting switch key to open and close the locks on the caps and covers.
For details of the locations of the caps and covers with locks, see “LOCKING (3-126)“.
Insert the key as far as it will go to the shoulder (A). If the key is
turned before it is inserted all the way, it may break.