Komatsu Galeo PC138US-8, Shop Manual

Page: 36 / 946

SEN01978-01 00 Index and foreword
22
PC138US, USLC-8
q
125 – 170, 12V140 engine
4) While pressing lock (E) of the connector,
pullout connector (5) in the direction of the
arrow.
Example)
Fuel pressure in common rail: PFUEL etc.
(
AMP-3 )
Example)
Injection pressure control valve of fuel
supply pump: PCV (
SUMITOMO-2 )
Example)
Speed sensor of fuel supply pump:
G (
SUMITOMO-3 )
a
Pull the connector straight up.
4. Turn-housing type (Round green connector)
q
140 engine
Example)
Intake air pressure sensor in intake mani-
fold (CANNON-04): PIM etc.
1) Disconnect connector (6) according to the
following procedure.
1]
Turn housing (H1) in the direction of
the arrow.
a
When connector is unlocked,
housing (H1) becomes heavy to
turn.
2] Pull out housing (H1) in the direction
of the arrow.
a
Housing (H1) is left on the wiring har-
ness side.
2) Connect the connector according to the
following procedure.
1]
Insert the connector to the end, while
setting its groove.
2] Turn housing (H1) in the direction of
the arrow until it “clicks”.