Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 48 / 184

17. Set work equipment lock lever (3) and parking brake lever
(4) to LOCK positions (L).
18. Stop the engine.
At this time, do not turn off the control box power supply.
19. After the engine stops, turn the starting switch to ON posi-
tion (B) again.
20. Measure the height from the base point to the blade edge,
add this value to the elevation of the base point. Check
that the total value is equal to the elevation recognized by
the machine in the step 14.
ADJUST BLADE ELEVATION
When checking the blade elevation, if the elevation recognized by the machine does not match with the sum of
the base point elevation and the height of blade edge from the base point, adjust the blade elevation.
1.
On the control box screen, press “iB logo key” and display
the main menu.
2.
Press “Blade Height Adjustment” in “Control” menu, and
select.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-34