Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 39 / 184

6.
Turn on the power supply of the control box.
Power supply of the base station and starting switch of the
machine can be off.
7.
On the control box screen, press “iB logo key” and display
the main menu.
8.
On “Control” menu, press “Blade calibration” and “Pitch
Rod Calibration” in order, and select.
9.
On the “Blade Pitch Rod Calibration” screen, press “Pitch
Rod Length:” input portion, and input the measured length.
10. Press “Ok”.
METHOD FOR INPUTTING WEAR AMOUNT OF BLADE EDGE AND TRACK
SHOE
As the cutting edge of blade, track roller or track link wears, finishing accuracy of the blade automatic control
deteriorates and the current ground display has an error. Measure the wear amount and input it to correct this
error.
When these parts wear or they are replaced with new ones, wear amount should be input. Measure the wear
amount and input it.
1.
Stop the machine on a level ground.
2.
Lower the blade to the ground.
3.
Set work equipment lock lever (1) and parking brake lever
(2) to LOCK positions (L).
4.
Stop the engine.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-25