Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 34 / 184

1.
Press Auto/Manual switch once to turn on the blade auto-
matic control.
2.
Check that “AUTO” is displayed on the main window of the
control box.
3.
Press pitch button (1), and keep it for 1 second or more.
The buzzer sounds “peep” twice.
The auto-pitch adjustment starts when releasing your hand
from pitch button (1).
Operate pitch button (1) when the joystick (steering, direc-
tional and gear shift lever) is in NEUTRAL or REVERSE
position. The auto-pitch adjustment operation cannot be
performed when the joystick (steering, directional and gear
shift lever) is in FORWARD position.
4.
The “slope control key” on the main window becomes green, check that the message of “Blade Pitch Not
Set For Finish” is not displayed.
The auto-pitch adjustment operation is completed.
METHOD FOR STOPPING ENGINE
NOTICE
The power supply of the control box is not linked with the starting switch of the machine. After finishing
the operation, press the power OFF switch of control box to turn off the control box power .
If the power supply of control box is not turned off, the batteries may be exhausted.
1.
Press Auto/Manual switch once to turn off the blade auto-
matic control.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-20