Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 28 / 184

GNSS RECEIVER
(1) Radio antenna connecting point
(2) GNSS antenna connecting point
(3) Machine body harness connecting point
(DRC26-40P(A))
(4) Machine body harness connecting point
(DRC26-40P(B))
(5) GNSS satellite capturing display LED
GNSS satellite capturing display LED (5) indicates the number of GNSS satellites by color and number of flash-
es.
• Number flashes in green: Number of captured GPS
• Number flashes in orange: Number of captured GLONASS
GNSS receiver has the following functions.
• Receives GNSS position information from GNSS satellite through GNSS antenna, and processes it.
• Receives the correction information of GNSS position from the base station through the radio antenna, and
processes it.
• Receives the network signals in the machine and information from the input signals, and processes them.
• Calculates the coordinate information necessary for the blade automatic control from the received informa-
tion, and outputs it.
AUTO-PITCH ADJUSTMENT
(Sigma power pitch dozer)
EXPLANATION OF COMPONENTS OPERATION
3-14