Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 27 / 184

REMARK
While the back grade mode is turned on, you can perform leveling work even in reverse travel since the blade
automatic control also operates in reverse travel similarly to in forward travel.
For detail, see “HANDLE AUTOMATIC BLADE CONTROL (3-35)”.
GNSS ANTENNA
k k
WARNING
• Cable connector of the GNSS antenna is looseness-free structure. Check is not needed.
• If the GNSS antenna contacts with obstacles during operation or traveling, and it has to be checked
and replaced, ask your Komatsu distributor.
• There is a danger of falling or tipping over that can lead to serious personal injury or death. Do not
get on the cab to check the GNSS antenna.
GNSS antenna is the device to receive the radio waves from
the GNSS satellite.
GNSS RADIO DEVICE
GNSS radio device is used to receive radio waves from the base station.
Install GNSS radio device suitable for the radio specification of the base station.
For usable GNSS radio device, consult your Komatsu distributor in advance. For details of handling GNSS radio
device, see the instruction manual of GNSS radio device.
OPERATION EXPLANATION OF COMPONENTS
3-13