Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 123 / 184

7.
On “GPS Comms Configuration” screen, set “Connection:”
to “UDP/IP”, and press “Defaults”.
8.
When the value in the figure is reached, press “Next”.
9.
On “GPS Precisions” screen, input “Max. GPS errors (rov-
ing):” and “Max. GPS errors (point measurement):”, and
press “Next”.
10. On “GPS radio configuration” screen, select the radio infor-
mation, and press “Finish”.
For detail, see “METHOD FOR CONFIGURING RADIOS
(3-22)”.
METHOD FOR SETTING AS-BUILT CONTROL OPTIONS
METHOD FOR ADDING AND SETTING AS-BUILT SURFACE DISPLAY
This function enables you to control the as-built surface of “Elevation” and “Pass Counts” displayed by the cur-
rent surface with the internal memory of the server or the control box.
AJD02617
AJD02618
AJD02619
HANDLE CONTROL BOX CONTROL MENU
4-33