Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 110 / 184

“Show” is set as “Yes” (Display).
When a project file is newly set in the internal memory of
the control box, “Show” is set as “Yes” (Display).
10. Press “Ok”.
The screen returns to the main window.
11. On the main window, press “iB logo key” and display the
main menu.
12. On “File” menu, press “Active” and “Surface” in order, and
select.
13. Select a surface to be set as the current work from the sur-
faces list.
The screen returns to the main window.
METHOD FOR CREATING FLAT SURFACE FILES
When creating the flat plane surface, perform the following procedure.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “File” menu, press “Surfaces...” and select.
3.
On “Project Surfaces” screen, press “New...”.
AJD02587
AJD02588
AJD02582
AJD02589
FILE MENU HANDLE CONTROL BOX
4-20