Komatsu D61EX-24, Operation & Maintenance Manual, Page: 336 / 435

METHOD FOR CLEANING INSIDE MACHINE
k k
WARNING
If compressed air, high-pressure water, or steam hits your body directly or dirt is scattered by the com-
pressed air, high-pressure water, or steam, there is a danger of personal injury. Always wear protective
equipment such as protective eyeglasses and dust mask.
Clean the inside of the machine when any sand, and dust is accumulated.
1.
Remove the mounting bolts, and remove covers (1) to (4)
from the bottom of the machine.
2.
Remove the sands and dusts from inside of the machine.
3.
After cleaning, install covers (1) to (4) with the mounting
bolts to the bottom of the machine.
METHOD FOR CHECKING AND CLEANING RADIATOR FRONT
k k
WARNING
If compressed air, high-pressure water, or steam hits your body directly or dirt is scattered by the com-
pressed air, high-pressure water, or steam, there is a danger of personal injury. Always wear protective
equipment such as protective eyeglasses and dust mask.
1.
Open battery inspection cover (1).
2.
Check the front face of radiator for clogging.
If it is heavily clogged, remove cover (2) from the back of
the operator's seat, and clean it with compressed air, etc.
MAINTENANCE MAINTENANCE PROCEDURE
4-23