Komatsu D51EX-24, Operation & Maintenance Manual

Page: 97 / 382

PEDAL MODE
Select “Pedal Mode” on “Mode Select” screen, and press
switch F6.
Pedal mode can be switched in accordance with the operation.
Pedal mode can also be switched with the pedal mode selector
switch.
REVERSE TRAVEL SPEED SETTING
Select “Reverse Travel Speed Setting” on “Mode Select”
screen, and press switch F6.
Reverse travel speed can be selected out of 5 levels according
to the operation.
Reverse travel speed can also be set with the reverse travel
speed setting switch.
LOAD DISPLAY
Select “Load Display” on “Mode Select” screen, and press
switch F6.
Display/Non-display of load graph can be switched.
Horizontal axis (X) indicates the time, and vertical axis (Y) indi-
cates the drawbar pull in the load graph.
Similarly to the ECO gauge, it is recommended to use in green
range (G).
The graphs on the screen are updated and scrolled to the left
at intervals of several seconds. (The latest information is dis-
played at the right end.)
OPERATION EXPLANATION OF COMPONENTS
3-41