Komatsu D51EX-24, Operation & Maintenance Manual

Page: 239 / 382

METHOD FOR CHECKING AFTER FINISHING WORK
CHECKS BEFORE STOPPING ENGINE
On the machine monitor, check the engine coolant tempera-
ture, hydraulic oil temperature, engine oil pressure, remaining
fuel level, and remaining DEF level.
CHECKS AFTER STOPPING ENGINE
1.
Perform walk-around check for oil or coolant leakage and for abnormality in work equipment, exterior parts,
and undercarriage.
If oil or coolant leakage or any abnormality is detected, repair it.
2.
Check DEF tank, pump, injector, hose, and joint for leakage.
If any abnormality is found, ask your Komatsu distributor for repair.
3.
Fill the fuel tank.
4.
Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
5.
Remove any mud affixed to the undercarriage.
LOCK
The following sections are lockable to prevent vandalism.
Places where can be locked with the starting switch key
• Cab door opener (1) (right and left)
• Engine side cover (2) (upper left)
• Engine side cover (3) (lower left)
• Hydraulic tank inspection cover (4)
• DEF tank filler port cover (5)
• Fuel tank inspection cover (6)
• Radiator filler port inspection cover (7)
• Hydraulic tank oil filler cap (8)
OPERATION MACHINE OPERATIONS AND CONTROLS
3-183