Komatsu D375A-8, Operation & Maintenance Manual

Page: 140 / 466

3.
The screen switches to the Clock Adjustment screen for
selecting a menu.
The following 5 items can be changed.
(a): “GPS Synchronization”
(b): “Calendar”
(c): “Time”
(d): “12h/24h Mode”
(e): “Daylight Saving Time”
REMARK
• (b) Calendar and (c) Time need to be readjusted since
they are reset after a long-term storage.
• When the GPS Synchronization is set to ON, they are
automatically readjusted.
4.
Perform the following setup procedure by operating switches F3 to F6 on the Clock Adjustment screen for
selecting a menu.
GPS SYNCHRONIZATION SETTING
On machines equipped with KOMTRAX-Plus, turning on “GPS
Synchronization” menu enables automatic setting of the moni-
tor's date and time in accordance with the clock of GPS.
F3: Moves to the next item (1 line below). Moves to the top line
when on the bottom line.
F4: Moves to the previous item (1 line above). Moves to the
bottom line when on the top line.
F5: Cancels change and returns to “Clock Adjustment” screen.
F6: Displays the setting screen for selected item.
REMARK
• When the machine is in the environment where the radio
waves from GPS cannot be received, such as inside of a
building, the automatic setting function may not work.
• While“GPS synchronization” menu is turned on, the menu
for “Calendar” (b) and “Time” (c) cannot be selected.
CALENDAR SETTING
Adjust the date of the monitor.
REMARK
As long as “GPS Synchronization” menu is turned on, “Calendar” menu is not selectable.
1.
Select “Calendar” (b) on “Clock Adjustment” screen, then
press switch F6.
EXPLANATION OF COMPONENTS OPERATION
3-82