Komatsu D375A-8, Operation & Maintenance Manual

Page: 134 / 466

AFTERTREATMENT DEVICES REGENERATION
Each item of “Aftertreatment Devices Regeneration” menu (c)
is to make settings for aftertreatment devices regeneration.
MAINTENANCE SCREEN SETTING
Each item of setting menu (e) on “Maintenance” screen is used
for displaying and setting the notification relevant to mainte-
nance.
The items on the maintenance display are as follows.
A B
Air Cleaner Clean and Change When required
Coolant Change When required
Fuel Prefilter Change 500
Engine Oil Change 500
Engine Oil Filter Change 500
P/T Oil Filter Change 500
Fuel Main Filter Change 1000
Hydraulic Tank Breather Change 1000
P/T Oil Change 1000
P/T Case Breather Change 1000
Final Drive Oil Change 2000
Hydraulic Oil Pilot Filter Change 1000
Fuel Tank Breather Change 1000
Hydraulic Oil Filter Change 2000
Damper Case Oil Check and Change 2000
Hydraulic Oil Change 2000
KCCV Filter Change 2000
KDPF Filter Cleaning 4500
Fuel Doser Clean 4500
A: Maintenance items
B: Default maintenance interval settings (h)
C: Time remaining until maintenance (h)
On the “Maintenance” menu screen, it is possible to perform the following operations with switches F1 to F6.
F1, F2: Moves to the right and left menus.
F3: Moves to the next item (1 line below). Moves to the top line when on the bottom line.
F4: Moves to the previous item (1 line above). Moves to the bottom line when on the top line.
EXPLANATION OF COMPONENTS OPERATION
3-76