Komatsu D155AX-8E0, Operation & Maintenance Manual

Page: 143 / 420

SCREEN ADJUSTMENT (CAMERA)
k k
CAUTION
Never drive the machine (in reverse) while watching only the camera screen. Be sure to visually check
the safety around the machine.
The guide lines indicate blade width lines and a line 5 m away from the rear of the machine. When
changing the blade, ask your Komatsu distributor for adjustment of the camera screen.
1.
Select camera screen adjustment on the monitor setting
menu screen.
2.
Press switch F6.
On the Screen Adjustment screen, the following items related
to the camera screen can be set.
• Camera image screen brightness adjustment
• Camera view mode setting (Setting of Reverse Synchroni-
zation)
• Guide line display mode setting
On this screen, it is possible to perform the following operations
with switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on the first line, it moves to the last line.
F5: Cancels the change of setting and returns to the monitor setting menu screen.
F6: Changes the setting and returns to the monitor setting menu screen.
ADJUST CAMERA IMAGE BRIGHTNESS
1.
Select “Brightness Adjustment” on “Screen Adjustment
(Camera)” menu.
2.
Press switch F6.
OPERATION EXPLANATION OF COMPONENTS
3-81