Komatsu D155AX-8E0, Operation & Maintenance Manual

Page: 139 / 420

2.
Select the set time on the “Auto Idle Stop Timer Setting”
screen shown in the figure, and then press switch F6.
On the “Auto Idle Stop Timer Setting” screen shown in the
figure, you can perform the following operations with
switches F3 to F6.
F3: Moves to the next item (1 line below). Moves to the top
line when on the bottom line.
F4: Moves to the previous item (1 line above). Moves to
the bottom line when on the top line.
F5: Cancels selection and returns to machine setting menu
screen.
F6: Allocates the selected setting to that of the Auto Idle Stop Timer Setting.
REMARK
• Choosing “OFF” disables operation of the auto idle stop function.
• You cannot select a time longer than that specified in the Service Menu.
3.
When the idling time reaches 30 seconds before the set
time, the monitor returns to the standard screen and
changes to the countdown screen.
At this time, the engine speed is fixed to Low idle (MIN)
position.
If you set the parking brake lever or work equipment lock
lever to FREE positions, countdown stops and the screen
returns to the standard screen.
4.
When countdown reaches 0, the engine stops and the
screen changes to the Auto Idle Stop in Operation screen.
5.
To prevent battery discharging, turn off unnecessary
switches.
REMARK
While the auto idle stop is activated, only the engine is
stopped and the machine monitor, inverter, etc., as well as
the electrical components including the air conditioner, ra-
dio, lamps, and wipers keep their states before the engine
is stopped.
To prevent causing flat battery, turn the starting switch to
OFF position.
6.
When restarting the engine, turn the starting switch as usual.
AFTERTREATMENT DEVICES REGENERATION
Each item of “Aftertreatment Devices Regeneration” menu (c)
is to make settings for aftertreatment devices regeneration.
For details of aftertreatment devices regeneration, see “HAN-
DLE Komatsu Diesel Particulate Filter (KDPF) (3-113)”.
The operation methods and the contents of the display of
KDPF regeneration and urea SCR regeneration are common.
OPERATION EXPLANATION OF COMPONENTS
3-77