Komatsu A63001, Shop Manual

Page: 32 / 41

GENERAL SPECIFICATION DRAWING
01-2
2
WB156-5
SPECIFICATION DRAWING
SPECIFICATIONS
MACHINE DIMENSIONS AND WEIGHTS
A Maximum height 4230 mm (13’11”)
O
Maximum digging height 5525 mm (18’2”)
B Hinge pin height 3367 mm (11’1”) -with telescopic arm 6136 mm (20’2")
C Overall height, ROPS Cab 2935 mm (9’8”)
P
Digging depth (2’ level bottom)
-with telescopic arm
4670 mm (15’4”)
5916 mm (19’5”)
D Maximum dumping height 2622 mm (8’7”)
E
Reach at maximum height
and 45
o
dump angle
750 mm (2’5”) Q
Reach at maximum height
-with telescopic arm
3046 mm (10’0”)
4239 mm (13’11”)
F Dumping angle
45
o
R
Maximum reach from swing center 6034 mm (19’10”)
G Rollback angle
45
o -with telescopic arm
7164 mm (23’6”)
H Digging depth 138 mm (5’4”)
S
Maximum digging depth 4725 mm (15’6”)
I Bucket reach (transport) 2023 mm (6’8”) -with telescopic arm 5970 mm (19’7”)
J Ground clearance 430 mm (1’5”) T Digging reach 2320 mm (7’7”)
K Wheel base 2175 mm (7’2”) U Rear tread 1800 mm (5’11”)
L Backhoe swing center distance 1175 mm (3’10”) V Front tread 1874 mm (6’2”)
M Transport length 7504 mm (24’7”) W Overall width (with bucket) 2356 mm (7’9”)
N
Dumping height (SAE) 3761 mm (12’4”)
X
Backhoe transport height 3676 mm (12’1”)
-arm retracted 3747 mm (12’4’’) -with telescopic arm 3746 mm (12’4”)
-arm extended 4435 mm (14’7”)