FOREWORD
HOISTING INSTRUCTIONS
WB140PS-2N WB150PS-2N
00-7
12
HOISTING INSTRUCTIONS
00
HOISTING
00
●
If a part cannot be smoothly removed from the machine
by hoisting, the following checks should be made:
1.
Check for removal of all bolts fastening the part to the
relative parts.
2.
Check for existence of another part causing interface
with the part to be removed.
WIRE ROPES
00
1.
Use adequate ropes depending on the weight of parts to
be hoisted, referring to the table below:
★
The allowable load value is estimated to be 1/6 or 1/7 of
the breaking strength of the rope used.
2.
Sling wire ropes from the middle portion of the hook.
Slinging near the edge of the hook may cause the rope to
slip off the hook during hoisting, and a serious accident
can result. Hooks have maximum strength at the middle
portion.
3.
Do not sling a heavy load with one rope alone, but sling
with two or more ropes symmetrically wound on to the
load.
4.
Do not sling a heavy load with ropes forming a wide
hanging angle from the hook. When hoisting a load with
two or more ropes, the force subjected to each rope will
increase with the hanging angles. The table below
shows the variation of allowable load (kg) when hoist-
ing is made with two ropes, each of which is allowed to
sling up to 1000 kg vertically, at various hanging angles.
When two ropes sling a load vertically, up to 2000 kg of
total weight can be suspended. This weight becomes
1000 kg when two ropes make a 120° hanging angle. On
the other hand, two ropes are subject to an excessive
force as large as 4000 kg if they sling a 2000 kg load at a
lifting angle of 150°
00
WARNING!
Heavy parts (25 kg or
more) must be lifted
with a hoist etc. In the
DISASSEMBLY AND ASSEM-
BLY section, every part weighing
25 kg or more is indicated clearly
with the symbol.
Wire ropes
(Standard “Z” or “S” twist ropes without galvanizing)
Rope diameter
Allowable load
mm
kN
tons
10
9.8
1.0
11.2
13.7
1.4
12.5
15.7
1.6
14
21.6
2.2
16
27.5
2.8
18
35.3
3.6
20
43.1
4.4
22.4
54.9
5.6
30
98.1
10.0
40
176.5
18.0
50
274.6
28.0
60
392.2
40.0
WARNING!
Slinging with one rope may
cause turning of the load during
hoisting, untwisting of the rope,
or slipping of the rope from its
original winding position on the
load, which can result in a dan-
gerous accident
