Komatsu Utility 69001, Operation & Maintenance Manual

Page: 149 / 276

OPERATION
OPERATION
3-95
4. Set work equipment lock leve (3) in the LOCK position (L).
CHECK AFTER FINISHING WORK 3
BEFORE STOPPING ENGINE 3
Use the meters and caution lamps to check the engine coolant
temperature, engine oil pressure, fuel level, and Power train oil
temperature.
AFTER STOPPING ENGINE 3
1. Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check for
any leakage of oil or coolant. If any problems are found, repair them.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4. Remove any mud affixed to the undercarriage.