Please read and understand these instructions completely before installation to avoid injury to yourself or damage to the vehicle
or accessory.
Dealer:
These instructions contain important information for future reference and must be given to the customer at time of purchase or
upon completion of installation.
Parts List:
Please Note: The Outfitter Box was designed to fit most ATV rack
systems. These particular instructions demonstrate mounting this
accessory on a tubular-type rack system. Because rack systems may
vary in size and design, use your best judgement in determining
where to locate the mounting hardware in order to provide a secure and
stable installation.
1)
Position your Outfitter Box on the rear rack of your vehicle in your
desired location and center as indicated in
Image “A”
.
2)
Once you have the Outfitter Box positioned properly, use a pencil to
mark two mounting points. Do this by scribing a line at these locations
on each side of the rack as indicated in
Image “B”
.
3)
After you have marked the two mounting locations, remove the
Outfitter Box and carefully lay it upside-down on a level surface.
Center one of the supplied U-bolt plates on the lines you have just
marked. Using the U-bolt plate as a template, mark the two hole
locations with a pencil as indicated in
Image “C”
. Repeat this step.
Outfitter Box Installation Instructions
Stock No.:
93450
ITEM
PART NAME
PART NO.
DESCRIPTION
(60-93450)
QTY.
1
Box
100-93450 Outfitter Box assembly
1
2
U-Bolt
72-0001
1/4” x 1-1/8” x 2” U-bolt, zinc-plated
2
3
U-Bolt Plate
72-0002
2” x 3/4” U-bolt plate, zinc-plated
2
4
Washer
76-0035
1/4” bonded sealing washer, zinc-plated
4
5
Washer
76-0041
1/4” lock washer, zinc-plated
4
6
Nut
77-0017
1/4”-20 finish nut, zinc plated
4
7
Thread Cap
56-0008
Black thread caps
4
Rear of
Vehicle
Image A
Center
Underside
of Outfitter
Box
Image C
Outfitter Box
Underside
of Your Rack
Image B
