Kollmorgen M-ST-009-2031 Installation Manual Download Page 9 | Manualshive

Page: 9 / 48

background image

Danaher Motion

System Description

SERVOSTAR

®

SBD-Series ST/CT Product Family

3

System Description

The SERVO

STAR

SBD-Series is a four-quadrant analog brush-type servo motor drive amplifier that

meets the needs of many servo applications such as machine tooling, packaging, electronic assembly, and
document handling. The SBD-Series of drives comes in standard packages of 3, 6, 10, 20, 30, 55, and 85
amps. A wide range complementary of Power Supply Modules are also available. A CT-series (Compact
Drive), that includes an integrated BUS module, is available in 3, 6 and 10 amp sizes. All are packaged in
a small frame size perfect for minimizing cabinet space. This product is a velocity controller commanded
through an industrial st/- 10V analog interface using a DC tachometer generator for velocity
feedback.

PRODUCT FEATURES

The SERVO

STAR

SBD is a brush motor drive capable of controlling the motor’s velocity using a

tachometer generator mounted to the motor as the feedback device. The drive is designed as a modern
update to Kollmorgen’s SBD Series of brush drive amplifiers produced over the past 25 years. The drive
is fully analog and can receive the exact comp (compensation) card that was used in existing SBD2
application. The drive is built on Kollmorgen’s SERVO

STAR

S-Series platform, which uses modern

technology and has a long life expectancy. The SERVO

STAR

S-Series of brush drives is modular in

design meaning that it has a separate power supply module. The PS Series of power supply modules are
fully compatible to the SERVO

STAR

SBD Series of products.

Fault and Safety Detection

Over Voltage protection
Over Current Protection (Short Circuit)
Under Voltage Lock-out (Can be disabled)
Motor Over Speed Protection
Over Temperature Protection (Drive’s internal temperature)

General

Industry St/- 10 Volt command signal input
External Regeneration Capability
SBD2 Compensation-Compatible Drive
Wide Range of Power Capacity
Smaller units available with integral Power Supply
Units available with Modular Power Supply

StockCheck.com

«
...
7
8
9
10
11
...
»

Summary of Contents for M-ST-009-2031

















































Reviews:

No comments

Related manuals for M-ST-009-2031

Brand: QUAD Pages: 12

Brand: NAD Pages: 2

Brand: Barcus-Berry Pages: 2

The Prelude PC-200

Brand: Harman Kardon Pages: 6

Brand: Harman Kardon Pages: 16

Brand: Harman Kardon Pages: 32

Brand: Harman Kardon Pages: 8

Brand: Harman Kardon Pages: 26

Brand: Harman Kardon Pages: 11

Brand: Harman Kardon Pages: 31

Brand: Harman Kardon Pages: 18

Brand: Harman Kardon Pages: 29

Brand: Harman Kardon Pages: 48

Brand: NAD Pages: 12

Brand: Tekbox Pages: 10

Brand: Movon Pages: 44

Brand: Crate Pages: 4

Brand: Parasound Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands