3.2 EtherCAT Onboard
Connection to the EtherCAT Network via X5 (in port) and X6 (out port).
3.2.1 LED functions
The communication status is indicated by the built-in LEDs.
Connector LED# Name
Function
X5
LED1 IN port Link
ON = active
OFF= not active
LED2 RUN
ON = running
OFF = not running
X6
LED3 OUT port Link
ON = active
OFF = not active
LED4 -
-
3.2.2 Connection technology
You can connect to the EtherCAT network using RJ-45 connectors.
3.2.3 Network Connection Example
AKD EtherCAT | 3 Installation and Setup
Kollmorgen | kdn.kollmorgen.com | October 2017
13