Innovative Network RTK Receiver
The meaning of all indicators during self
-
check
Items
Description
Glows in green to indicate the enough power supply for receiver
If this indicator glows in green during self
-
check procedure, it represents the Bluetooth module is
checked and completed.
If this indicator glows in green during self
-
check procedure, it represents the WIFI module is
checked and completed.
If this indicator glows in green during self
-
check procedure, it represents the OEM board is
checked and completed.
3.4. Factory Reset
Factory reset is a new interactional operation on S680N receiver, it is mainly used to bring internal configuration of
receiver back to factory default setting. Such as reset the function of LEMO port from normal USB to Ethernet
function, and reset the WIFI function from
client mode
to
AP mode
(WiFi hotspot).
Factory reset is similar to the operation of self
-
check, keep pressing power button for a while (after self
-
check
entrance) until the indicators flash one by one from left to right, at this moment, release power button and the
receiver gets into factory reset procedure. This procedure would take about 10 seconds, after that the receiver will
switch off automatically.
Normal state, starts
tracking satellites
Factory reset is
completed
Factory reset is performing, indicators
light up one by one from left to right
