18
4. INITIAL SETTINGS
4.1 Setting the Temperature and Atmospheric Pressure
If the T&P correction of the Total Station is off, you should follow the steps below; If it is on,
there is no need to set the Temperature and Atmospheric Pressure, the instrument will detect
the Temperature and Atmospheric Pressure automatically, and make the correction with PPM.
Measure the temperature and air pressure of the station point in advance. For example:
Tempe25
‵
, Air pressure 1017.5hPa.
Procedure
Operation
Display
①
Press star key to enter quick settings
★
②
Enter PPM setting. Measure the
temperature and air pressure of the
station point in advance
3
③
Press [
▲
]or[
▼
] to temperature
setting
[
]or[
]
