Owner’s Manual
6CC10BEA2AA00
11
Figure 17 - hanging assem-
bly attachment
1. Install 1/2” threaded rod and vibration insulator to
ceiling.
2. Remove Hanging assembly 1 set (2ea) from carton.
3. Place the hanging assy horizontally on the base of air
conditioner.
4. Use screw (enclosed inside of box with hanging kit) to
install as shown in Figure 17.
5. Lift and mounted the unit.
Removing the power supply cord and permanently connection the unit should be per-
formed only by a qualified electrician.
6CC10BEA2AA00 is heavy.(121lbs) A minimum of 2 people are required to lift the unit.
When hanging and permanently connecting the unit all applicable local/state/federal
building codes must be followed.
The structural beam being used must be properly support the weight of
6CC10BEA2AA00.
HANGING ASSEMBLY
