14
Control Panel Operations
Using the Control Panel
To Turn the Unit on:
Press the On/Off
button
.
Auto-Restart:
If power to the unit is interrupted, the air conditioner will restart itself in its last
used mode and settings once power is restored. The compressor will restart after 3 minutes.
To Change the Temperature:
Press or hold either Up
or Down
button until desired temperature is seen on the
digital display. This temperature will be automatically maintained anywhere between 62 °F
(17° C) and 86° F (30° C).
The unit is capable of displaying the temperature in degrees Fahrenheit or degrees Celsius.
To convert from one to the other, press and hold the Up and Down Temp / Timer buttons at
the same time for 3 seconds.
To Adjust Fan Speeds:
To select the speed of the fan press Fan Speed
which cycles through four steps- Auto,
Low, Medium, or High. Each time the button is pressed the fan speed mode is shifted.
On/Off
Energy Saver
Timer
Mode
Check Filter
Fan Speed
Sleep
Temp/Timer Up
Temp/Timer Down
Note: The fan speed is not adjustable in Dry, Auto or Heat modes. It is controlled automatically.
