Koike Sanso Kogyo WEL-HANDY MINI, Operation Manual

Page: 26 / 46

WEL-HANDY MULTI
23
4 Preparation and procedure for operation
Warning
Strictly observe the following to prevent burns
Never directly touch the torch nozzle, tip, orifice, insulation cylinder, and
the surface of the carriage which are very hot right after welding.
Caution
Set the welding power switch in the “No Self-Holding (or No Crater
Treatment)” position.
When the switch of the welding power supply, which is to be connected to
the welding machine, is set in the “Self-Holding (or Crater Treatment)”
position, the welding arc will not stop even if the welding operation is
stopped.
4.1 Contents of package
Carefully take the machine out of the case.
First, please check your unit to make sure it is complete.
The following is a list of the standard parts you should receive.
WEL-HANDY MULTI KIT
Main unit 1 set
Control cable 1 pc
Exclusive use welding torch
(option)
Accessories
Fuse (1A) 1 pc
Hexagon wrench (M6/M5) 1 pc each
Instruction manual 1 pc
Wel Handy.book Page 23 Wednesday, April 10, 2002 4:00 PM