PART LIST
QUANTITY
A
1 PC
B
2 PC
C
4 PC
D
2 PC
E
4 PC
F
1 PC
SAVE THESE INSTRUCTIONS
THE BIG ONE ROCKING DISH CHAIR ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE
FIGURE
DESCRIPTION
Chair
A. STANDING AT THE BACK OF THE CHAIR (A), LIFT
UP THE BACK UNTIL THE SPRING PIN IS FIXED IN THE HOLE.
B. APPLY PLASTIC CAPS (C) TO BOLT HOLES ON TOP OF LEGS
AND APPLY PLASTIC CUFFS (B) TO BOTTOMS OF LEGS OVER
BOLT HOLES.
C. THE CHAIR IS NOW ASSEMBLED AND READY FOR USE.
USE AS STATIONARY CHAIR
Plastic Cuff
Allen Wrench
Plastic Cap
Runner
Bolt
Page 1/2
