Kohler STERLING, Installation Instructions Manual, Page: 10 / 56

6. Install the Wall Jambs
8-18 x 1-1/2"
IMPORTANT! The round holes on the wall jambs must face the inside of the shower.
Drill a 5/16" hole at each marked location. Use a masonry bit for tile walls.
Install the provided wall anchors. Verify that the anchors are fully seated into the wall.
Repeat for the opposite wall.
Thoroughly clean the shower ledge, floor, and walls.
Reposition the wall jamb, aligning with the anchor holes. Verify the holes on the wall jamb face the interior of the
shower.
Secure the jamb with the four provided #8 x 1-1/2" screws.
Repeat for the second wall jamb.
1487427-2- B
10 Sterling