Repair
Service and Repair Manual
Exhaust gas system
3.8.3 Exhaust gas turbocharger removal and installation (SL 213)
Previous tasks
q
Drain LT coolant water.
q
Remove turbocharger cooling lines.
(For more information see: 3.10.3 Turbocharger cooling
lines removal and installation, page 211.)
Specific safety instructions
WARNING
Hazards by hot engine near operating temperature.
Any contact with hot surfaces could result in death or serious injuries by burns.
The engine control unit (ECU) is hot while operating the engine.
u
Avoid any contact with the engine, parts carrying hot coolant or oil, the exhaust system, the
turbocharger, the heat protection, the battery, the covers, and the ECU.
u
Proceed with the tasks on the engine only once the temperature has cooled down enough so
that surfaces can be touched with bare hands.
NOTICE
Risk of property damage by reuse of sealing.
Leakage by faulty seal.
u
Replace all sealings.
Special tools
Not applicable.
Consumables and equipment
– Hot temperature grease
– Rags
– Cleaner
170
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07
