background image

Operation and Maintenance Manual

Transport and storage

Storage

6.5  Storage

6.6.1  Storage for up to 6 months

The Diesel engine is preserved from the shipping date; under normal storage
conditions in a dry, well ventilated place, the conservation protection normally lasts
for 6 months.

If the Diesel engine is covered with an additional foil hood, it can also be stored
outdoors for up to one month.

The cover must be waterproof and rest loosely against the Diesel engine so that air
can circulate around the Diesel engine, thus preventing the formation of any
condensation.

A shorter conservation protection period can be expected if these measures are
ignored and the conserved Diesel engine is exposed to less favorable conditions
(situated outdoors for longer periods of time or stored in damp, unventilated
locations etc.).

6.7.1  Storage for over 6 and up to 24 months

Please contact Field Service if planning storage over 6 months up to 24 months.

KD27V12 33521029401_3_1 en 2017-07-01

© 2017 by Kohler Co. All rights reserved.

97

Summary of Contents for KD27V12

















































































































Reviews: