Operation and Maintenance Manual
Operating fluids and maintenance
Maintenance schedule — COP Fuel optimized
5.9 Maintenance schedule — COP Fuel
optimized
5.9.1 COP Fuel optimized — Service level 1
SL100 Oil analysis
250
2
X
Take oil sample and perform oil analysis. Carry out after
500 h for category 3 and 2 lubricant.
SL121 Engine oil and oil
filter with
lubricant
“Category 1”
250
2
X
Replace Diesel engine oil and oil filter insert (at least every
2 years). At the latest after one year.
SL121 Engine oil and oil
filter with
lubricant
“Category 2”
500
2
X
Replace Diesel engine oil and oil filter insert (at least every
2 years). Perform once after 250 hours. At the latest after
one year.
SL105 Main fuel filter
1000
2
X
Replace main fuel filter.
SL106 Primary fuel filter
1000
2
Replace the primary fuel filter.
SL121 Engine oil and oil
filter with
lubricant
“Category 3”
1000
2
X
Replace Diesel engine oil and oil filter insert (at least every
2 years). Perform once after 250 hours. At the latest after
one year.
SL118 V-ribbed fan belt
2000
2
X
Check state of belt drive, replace if necessary.
SL117 Crankcase
breather belt
4000
2
X
Replace belt (at the latest when the oil separator filter insert
is replaced).
SL107 Crankcase
breather
4000
2
X
Replace oil separator filter insert (at latest when the belt for
the crankcase breather is replaced).
SL109 Belt for battery
charging
alternator and
water pump
4000
2
X
Check state of belt drive, replace if necessary.
SL116 Coolant
6000
4
X
Replace coolant.
SL120 Coolant analysis
2
X Take coolant sample and perform coolant analysis.
Tab. 28: COP Fuel optimized — Service level 1
KD27V12 33521029401_3_1 en 2017-07-01
© 2017 by Kohler Co. All rights reserved.
57
