BEFORE YOU BEGIN
BEFORE YOU BEGIN
TOUCHLESS URINAL SENSOR
72870T-ST
TOUCHLESS URINAL SENSOR
72870T-ST
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information -
please leave instructions for the consumer
-
RECOMMENDED TOOLS AND MATERIALS
RECOMMENDED TOOLS AND MATERIALS
Open end/adjustable wrenches
Tape measure
Basin wrench
Pipe wrench
Square
Level
Pliers
Socket wrench with sockets
Philips driver
Seal tape
Special wrenches
Wire cutter
Insulation tape
Bushing
/
SENSOR SPECIFICATIONS
SENSOR SPECIFICATIONS
72870T-ST
AC 220V
DC 6V
4
AA
0.3mW
3W
150,000
10-70cm(
)
1-60
0.07Mpa
-0.7Mpa
G1/2
:
2
2
6
0.3Mpa
3-5L
95RH
Model
72870T-ST
Power
AC 220V/DC 6V (4pcs AA alkaline batteries)
Can use dual power supply switches autom
atically, or used alone AC or DC.
Power consumption: static state 0.3mW trends 3W
Battery life
150,000 cycles
Sensing range
10-70cm( adjustable)
Working temperature
1-60
Working pressure
0.07Mpa -0.7Mpa
Water interface
G1/2
external thread
Installation: concealed into the wall
Flushing way
two-stage flush, the first is 2 seconds,
the second is 6 seconds
Rated flow: flush water about 3-5L when the water
pressure is 0.3Mpa
Environment humidity: below 95RH
