所有的资料是按最新出版的产品资料编写而成。
科勒公司保留任何时候不经通知即可改变产品特
性、包装或产品可供类型的权利。
说明书包括重要的安装、保养及清洁方面的内容，
请把这些资料交给用户阅读。
Avid Duo
DM
Sensor Faucet
安装之前
1.
一定要先彻底冲洗供水管以清除管道中的杂质
,
使用水源为自来水或可供饮用水。
2.
请勿将强力及冲击施于产品，以免造成故障，
引起漏水。
3.
安装、清洁龙头时，切勿损伤感应窗口表面，
以免造成故障。
4.
如果是安装新的洗面盆，可将水龙头和排水组
件先安装到面盆上。
NOTES:
注意事项:
All information is based on the latest product information
available at the time of publication, Kohler Co. reserves the
right to make changes to product characteristics, packaging,
or availability at any time without notice. Please deliver these
instructions for the consumer. They contain important
installation, maintenance and cleaning information.
1. Flush the water supply pipes thoroughly to remove debris.
Faucet is designed for tap water or potable water.
2. Handle the faucet with care to avoid damaged.
3. Do not damage the surface of sensing window when
installing or cleaning the faucet.
4. For new installations, install the faucet and drain to the
lavatory before installing the lavatory.
BEFORE YOU BEGIN
科勒（中国）投资有限公司
中国上海市静安区江场三路158号 邮编：200436
制造商：上海科勒电子科技有限公司
中国上海市宝山区丰翔路1955号 邮编：200444
AVID
AVID DUO DM SENSOR FCT COLD-AC 0.5GPM
艾非皂液感应龙头-单冷，交流含电源，1.9升
K-
EX29936T-N-CP
1383826-T01-A
1
8. Turn off the electrical source and shut down water
supply before servicing faucet.
6. For faucet with temperature mixer, please turn off valve
before connecting to hot water to avoid scalding.
7. Cover the sensing window with black tape when repairing
lavatories.
5. carefully follow the installation instructions provided.
Only provide to the electric power box after the installation
is conpleted.
5.
安装时务必按照说明书的要求正确连接导线，
龙头安装完毕后才可向电源盒供电。
6.
对于冷热混水龙头，先将连接热水的角阀关
闭，以免烫伤。
7.
修理面盆时，用黑色电工胶布粘住感应窗口。
8.
维修交流龙头时，必须断开交流电源并关闭
水源。
