User Keypad and Whirlpool Modes/Features
Power -
Turns the whirlpool pump on and off.
Outer Ring -
Rotate the outer ring to the desired mode. The selected mode will flash (blue).
Activate Button -
Press
″
OK
″
to activate the desired mode. The desired mode will no longer flash,
but will be illuminated (green).
Up Arrow -
Increases the water flow.
Down Arrow -
Decreases the water flow.
Flexjet Mode -
When illuminated, this mode allows you to adjust the water flow by pressing the up
or down arrows.
Neckjet Mode -
When illuminated, the neckjets are operating and you may adjust the pulsing speed
by pressing the up or down arrows.
Heater -
The heater automatically engages when the whirlpool is turned on. You may turn the
heater off by pressing the heater button. Press the button a second time to turn the heater back on.
Heater -
The heater automatically engages when the whirlpool is turned on. To turn the heater off,
rotate the outer ring until the heater mode is flashing and press
″
OK.
″
Press
″
OK
″
again to turn the
heater back on. The heater will help to maintain the water temperature up to 104°F (40°C).
Indicator Bar -
Shows the water flow volume.
Optional Remote Control
If you purchased a remote control, please refer to the Homeowners Guide packed with your remote control
for detailed information.
Lighted User Keypad
Power On/Off
Flexjet Flow Mode
Activates Mode Selected
Increases Flow or Pulse
Neckjet Mode-Adjust Pulse
Decreases Flow or Pulse
Backjet Mode-Adjust Pulse
Heater
Indicator Bar - Shows waterflow
volume or pulse speed
Rotate outer ring to
access desired mode.
1019451-5-C
4
Kohler Co.
