-4-
Step 2: Making connections
(KT100
KT200
KT400)
·
According to the
corresponding colors, insert the black 3/8"
Plastic tubing into the filter inlet port and
the water supply adapter, insert the blue
3/8" Plastic tubing into the filter outlet port
and the end of the Water filtration faucet
(Figure 3);
·
(KT500)
According to the corresponding
colors, insert the black 3/8" Plastic tubing
into the filter inlet port and the cold water
supply valve, insert the blue 3/8" Plastic
tubing into the filter outlet port and the end
of the Water filtration faucet. insert the
yellow 3/8" Plastic tubing into the filter
Auto Clean port and the end of the Tap
water faucet ( Figure 4).
·
(KT100
KT200
KT400)
3
3
(
3)
·
(KT500)
3
3
4
3
3
(
4)
Figure 3
3
Figure 4
4
Tap Faucet
Tap Faucet
Cold Water Supply Valve
Cold Water Supply Valve
3/8" Plastic Tubing-Blue
3
(
)
3/8" Plastic Tubing-Blue
3
(
)
3/8" Plastic Tubing-Black
3
(
)
3/8" Plastic Tubing-Black
3
(
)
3/8" Plastic Tubing-Yellow
3
(
)
Hot Water Supply Valve
Water Filtration Faucet
Water Filtration Faucet
3/8" x 1/2"
Male Thread Faucet Adapter
3
4
3/8" x 1/2"
Male Thread Faucet Adapter
3
4
Water Supply Adapter
3/8" x 1/2"
Female Thread Adapter
3
4
Hot Water Supply Valve
Note:
Note:
Cut tubing straight with a utility knife,
make sure there are no cuts, nicks, flat spots
or sharp edges as figure 5, If any of these are
present, cut the tubing again; Do not kink
tubing. ( Figure 5)
It may be difficult to release the tubing
due to water pressure when replacing service
parts. In this case, please shut off the cold
water supply valve, turn on the Water filtration
faucet to depressurize and then try to release
the tubing again.
(
5)
Figure 5
5
Correct Cut
Incorrect Cut
1
2
3
1
2
3
Figure 6
6
To Attach Tubing
Push tubing in as far as it can go
Tubing must be inserted past
O-ring and hit backstop
O
Insert the clip
To Release Tubing
Pull out clip
Push in collect to release tubing.
With collect held, pull tubing straight out.
Figure 7
7
1211428-T01-A
